Post Views: 512 Risk-Based Inspection (RBI) plans inspection frequency, depth, and breadth based on the site’s estimated risk to patients and product quality. In warehousing, inspectors go deeper when weak storage control could cause wrong material use, mix-ups, contamination, or…

Post Views: 496 Risk-Based Inspection (RBI) – Schedule M Point 14.1 (Raw material records as per Schedule U) In RBI, inspectors plan the depth and sampling of an inspection based on risk to patient/product quality and compliance signals, so material-management…

Post Views: 638 Risk-Based Inspection (RBI) is a GMP inspection approach where regulators plan inspection frequency, depth and scope based on estimated patient/product-quality risk and a site’s compliance history, using Quality Risk Management principles. cdsco.gov.in Schedule M + WHO TRS…

Post Views: 797 In a risk-based inspection (RBI), Schedule M and WHO TRS 986 coverage for 13.2–13.5 is evaluated as two linked risk themes: (1) prevention of label/printed material mix-ups (direct patient harm) and (2) prevention of errors/contamination from equipment…

Post Views: 658 In a risk-based inspection (RBI), Schedule M point 13.1 is assessed as a mix-up prevention control because incorrect status identification of containers/equipment can lead to wrong material use, cross-batch contamination, and release of unapproved product. What 13.1…

Post Views: 547 Risk-Based Inspection (RBI) is a methodology that rates manufacturing sites by the estimated risk they may pose to patients and product quality, and then plans the frequency, depth and breadth of inspection accordingly, using Quality Risk Management…

Post Views: 794 In a risk-based inspection (RBI), WHO TRS 986 checklist points 12.4–12.5 are assessed under cleaning validation because inadequate cleaning is a major driver of cross-contamination, mix-ups, and microbial/particulate carryover—especially during product changeovers and stop–start operations. 12.4 —…

Post Views: 595 RISK BASED INSPECTION [SCHEDULE M & WHO TRS 986-POINT (12.1-12.3)] means inspectors spend more time and deeper sampling on GMP systems that present higher patient/product-quality risk (e.g., contamination, mix-ups), and they test whether controls are effective in…

Post Views: 830 In a risk-based inspection, points 11.16–11.20 of the WHO TRS 986-based checklist focus on HVAC/air handling controls, because failures here can directly increase the risk of mix-ups, particulate contamination, microbial contamination, and cross-contamination—especially during product changeover and…

Post Views: 631 In WHO TRS 986 (Annex 2: WHO GMP – Main Principles), Section 11 is “Personal hygiene” and runs from 11.1 to 11.8 in the official text; clauses 11.14–11.15 do not appear in this edition. World Health OrganizationMany…

Post Views: 515 In WHO TRS 986 (Annex 2: GMP – main principles), Section 11 “Personal hygiene” is numbered 11.1 to 11.8 in the official text—there is no clause 11.13 in this edition. This “11.13” reference usually comes from internal…

Post Views: 542 Risk-Based Inspection (RBI) plans the frequency, depth and breadth of GMP inspections based on estimated risk to patients/product quality, using Quality Risk Management. CDSCO Schedule M (RBI checklist) Point 11.12 – what it is about In the…